Transport And Storing; Securing For Transport; Transport Procedure; Storing Of The Machine - Norton clipper CM 352 Operating Instructions Manual

VERS. 04.04.2019

4 TRANSPORT AND STORING

4.1 Securing for transport

Before transporting the machine, please follow the following instructions:

Always dismount the blade.

Empty the water tray and remove it.

Tighten the screws of the two water tray supports.

Remove also the conveyor cart to prevent any danger.

Loosen the screws of the feet and take them off.
The Blade, the water tray, the conveyor cart and the feet must be always transported separately.

4.2 Transport procedure

There are two ways to move the machine: By one person with the use of the transport wheels, or by two
persons.
While transporting the machine in a van our truck, always block properly the feet, the water tray and the
conveyor cart.
No part of the machine is designed for transport by crane.

4.3 Storing of the machine

If the machine is not going to be used for a long period, please take the following measures:

Completely clean the machine.

Empty the water cooling system.

Take the water pump out of the slurry and clean it thoroughly.
The storage site must be clean, dry and at a constant temperature.
MAN CM 352 EN
15