Transport And Storing; Securing For Transport; Transport Procedure; Long Period Of Inactivity - Norton clipper CS1-500 P13 Operating Instructions Manual

VERS.2022.10.20

5 TRANSPORT AND STORING

Take the following measures in order to transport and store the CS1-500 securely.

5.1 Securing for transport

Before transporting the machine:

Remove the blade.

Empty the water tank.

Raise the guide-a-cut in its upright position.

Raise the cutting frame to its highest position using the hand wheel.

5.2 Transport procedure

The machine can be moved on a flat surface using its wheels. Use the metal hook located on the
board of the machine over the motor to move the machine with a crane.

5.3 Long period of inactivity

If the machine is not going to be used for a long period, please take the following measures:

Completely clean the machine.

Loosen the drive belts.

Grease the threaded shaft.

Possibly change the motor oil.

Empty the water system.
The storage site must be clean, dry and at a constant temperature.
18
CS1-500_MAN_EN