Starting The Machine; Water Cooling System; Transport And Storing; Securing For Transport - Norton clipper TT 251 Operating Instructions Manual

VERS.2017.12.04

3.4 Starting the machine

Press the green button to start the machine. To start again the machine press on the red button.

3.5 Water cooling system


Fill the water pan with clean water to the small hole drilled into the plastic water tray.

Ensure that water is delivered adequately to both sides of the blade, as insufficient water supply
may result in premature failure of the diamond blade.

Always make sure that there is enough water in the pan and refill if necessary.

In case of frost, empty the water cooling system from its water.

4. Transport and storing

4.1 Securing for transport

Before transporting the machine, always remove the blade and empty the water pan.

4.2 Long period of inactivity

If the machine is not going to be used for a long period, please take the following measures:

Completely clean the machine

Empty the water system
The storage site must be clean, dry and at a constant temperature.
TT251_MAN_EN
14