Operating The Machine; Installation; Cutting Methods - Norton clipper CM 352 Operating Instructions Manual

VERS. 04.04.2019

5 OPERATING THE MACHINE

Please find in this chapter advices to use the machine safely and correctly.

5.1 Installation

5.1.1 Information concerning the working site

Remove from the site anything, which might hinder the working procedure.

Make sure the site is sufficiently well lit.

Observe manufacturer's conditions for connecting to power supplies.

Place electric cables in such a way that damage is excluded.

Make sure you have a continual adequate view of the working area so you can intervene in the working
process at any time.

Keep other staff out of the area, so you can work safely.

Set the machine on the flat and stable ground.
5.1.2 Space required for operation and maintenance
In order to use and maintain the machine safely and correctly, leave 2 m in front and 1, 5 m around of the
machine.

5.2 Cutting methods

To use the machine correctly, you must face it with one hand on the handle of the cutting head, and the other
on the conveyor cart. Always keep your hands away from the moving blade.
To start the machine, open the switch cover and press the green button.
To stop either use the red button or press directly on the switch front cover.
5.2.1 Full depth or fixed cutting
16
MAN CM 352 EN