Transport And Storing; Securing For Transport; Transport Procedure; Long Period Of Inactivity - Norton clipper CM 450 Junior Operating Instructions Manual

VERS. 07.06.2018

4 TRANSPORT AND STORING

4.1 Securing for transport

Before transporting the machine, always remove the blade and empty the water pan. Also remove
the conveyor cart, as it can be dangerous while you move the machine.

4.2 Transport procedure

Two people are necessary to move the machine. The machine can be moved with or without its
feet. Always remove feet while transporting the machine in a van and a truck. The machine does not
have lifting hooks. You can roll the machine on the floor using the wheels at the back of the
machine.

4.3 Long period of inactivity

If the machine is not going to be used for a long period, please take the following measures:

Completely clean the machine

Loosen the drive belts

Empty the water system

Take the water pump out of the slurry and clean it thoroughly.
The storage site must be clean, dry and at a constant temperature.
CM 450 Junior E_MAN_EN
15