Transport And Storing; Securing For Transport; Transport And Lifting Procedure; Long Period Of Inactivity - Norton clipper CS 502LV P13 Operating Instructions Manual

VERS.2022.09.11

5 TRANSPORT AND STORING

Take the following measures in order to transport and store the CS 502LV securely.

5.1 Securing for transport

Before transporting the machine:

Remove the blade.

Empty the water tank.

Lower the handle in its fixing tube and secure it using the locking screws.

Raise the guide-a-cut in its upright position.

Raise the cutting head to its highest position using the hand wheel, in order to activate the
parking brake.

5.2 Transport and lifting procedure

The machine can be moved on a flat surface using its wheels. Use the metal hook located over the
water tank to lift the machine with a crane. Utilization of other part of the machine (e.g. handles)
is absolutely prohibited.

5.3 Long period of inactivity

If the machine is not going to be used for a long period, please take the following measures:

Completely clean the machine.

Loosen the drive belt.

Grease the threaded shaft.

Possibly change the motor oil.

Empty the water system.

Activate the parking brake by raising the cutting head.
The storage site must be clean, dry and at a constant temperature.
CS 502LV P13_MAN_EN
19