VERS. 04.04.2019
MAN CM 352 EN
1 BASIC SAFETY INSTRUCTIONS
The CM 41 is exclusively designed for the cutting of construction products, with NORTON diamond blades,
mainly on construction sites.
Uses other than the manufacturer's instructions shall be considered as contravening the regulations. The
manufacturer shall not be held responsible for any resulting damage. Any risk shall be borne entirely by the
user. Observing the operating instructions and compliance with inspection and servicing requirements shall
also be considered as included under use in accordance with the regulations.
1.1 Symbols
Important warnings and pieces of advice are indicated on the machine using symbols. The following symbols
are used on the machine:
Read operator's instructions
Ear protection must be worn
Hand protection must be worn
Eye protection shall be worn
Rotation direction of the blade
Danger: risk of cut
6