Figure 9
SCSI Cabling in a Drive Control Path Library
Preparing the Host
If necessary, install a SCSI host system adapter, software, and compatible driver(s). Refer to the manuals
for the host system and SCSI host system adapter for detailed instructions. In addition, follow these general
guidelines:
•
When the host server system is turned on, install the software, and/or driver(s) that are compatible
with the library.
•
If the host server system is connected to a network, check with the system administrator before
turning off the power to the host.
•
Prevent electrostatic discharge (ESD) by following proper procedures. Always use wrist-grounding
straps and anti-static mats when handling internal components.
•
Make certain the host server system has an open expansion slot.
18
Setting up your Scalar 100