Optional features are available to configure your library to meet your specific needs. The optional features
available to you include:
•
Rackmounting hardware (rackmount kit)
•
Side panels (floor model kit)
•
Casters (floor models only)
•
Additional drives
•
Secondary power supply
•
Bulk load mailbox
•
Additional storage columns
•
Each column can hold up to three magazines.
•
Storage Networking Controllers (SNC)
•
Library Control Path libraries support SNC 5101 and SNC 6101. Drive Control Path libraries
support SNC 6101.
•
For information on the available SNC components, refer to the applicable manual on the Scalar
100 product CD or at www.adic.com.
•
Partitioning
•
AutoClean
Rackmounting Your Library
If you are rackmounting your library, use the rackmounting kit that is available from ADIC. The Scalar 100
requires 14U space in a standard 19 inch rack.
Before rackmounting your library, read the following guidelines:
•
For continued safe operation, the recommended maximum internal ambient temperature of the rack
should not exceed 40
•
During installation of a rackmounted unit, do not block or otherwise restrict airflow to the power
supply front or rear vents.
•
To maintain rack stability, make certain mechanical loading of the rack results in a low center of
gravity.
Scalar 100 User's Guide
Using the Optional Features
°
C.
23