Maintaining Your Library; Displaying Sacs (Advanced Vs Normal Service); Updating Firmware; Preferred Methods - ADIC Scalar 100 User Manual

Actions such as exercising the picker, the barcode scanner, and the library itself are considered
maintenance. These actions also include performing maintenance on drives and updating firmware.
Most of these actions are reserved for support personnel.

Displaying SACs (Advanced vs Normal Service)

When administering the library, there are certain commands that are password protected and only available
for support personnel. These commands are available by selecting ADVANCED from the Service menu. If
you choose NORMAL, the Service Action Codes (SACs) are displayed.
Path: Main Menu > More > Service > Library > Firmware Update
1 From the main menu, select More. Select Service and then select Library. Select Firmware Update.
2 Using Normal/Advanced, select NORMAL or ADVANCED service.
3 Select OK.
4 If you selected NORMAL, the SACs appear. If you selected ADVANCED, you are now ready to do
advanced service to the library.

Updating Firmware

Periodically, you will need to update your library and drive firmware.

Preferred Methods

Although some of these procedures are documented here, typically the operator panel options to update
firmware are for use by support personnel. To update your library, drive (LTO only), and/or RMU firmware,
use the Remote Management Unit. Firmware may also be updated using the serial port. To get instructions,
to update firmware via the serial port, go to www.adic.com/firmware.

Updating Library Firmware

Firmware Update is used by service personnel to update library firmware.
Path: Main Menu > More > Service > Library > Firmware Update
Scalar 100 User's Guide

Maintaining your Library

75