Clear Log; Force Dump - ADIC Scalar 100 User Manual

2 Using Change Drive, select the drive whose log you want to view.
3 Select OK.
The drive log contains:
• Num (0 to 9) — Error ID
• Error (0 to 9) — Error Type
• FSCI (0000 to 9999) — Fault symptom code 1
• FSC2 (0000 to 9999) — Fault symptom code 2
4 Use Next and Previous to scroll through the drive errors.
5 If you want to clear the log, or copy the log to a tape cartridge in the library, select Options.
• To clear the log, select Clear Log. Select OK.
• To send the log to a tape cartridge, do the following:
a. Select Force Dump.
b. Select Copy Dump.
c. Put a scratch cartridge in slot 1A1.
d. After the TEACH and INVENTORY, select OK.
e. The tape is placed into a drive, and the log is copied to the tape cartridge. When done, the tape
is placed back into slot 1A1. Select OK.

Clear Log

This option is used to erase the current drive error log.
Path: Main Menu > Status > Logs > Drive Logs > Clear Log
1 From the main menu, select Status and then select Logs and then select Drive Logs. Select Clear
Log.
2 Press the button beneath the desired softkey.
a. Press the button beneath the OK softkey to clear the current drive error log. The Clear Drive
Error Log Response Dialog appears.
b. Press the button beneath the Cancel softkey to cancel the action.
3 Press the button beneath the OK softkey.

Force Dump

This option is used to dump a drive error log to a hyperterminal.
Path: Main Menu > Status > Logs > Drive Log > Options > Force Dump
Scalar 100 User's Guide 55