Table of Contents
Advertisement
1
This chapter describes how to install and set up the library hardware.
Preparing for installation
Before installing the library, complete the following preliminary steps.
Installation and Operation
Installing the Hardware
1
✔
Step
Description
1
Unpack the library.
2
Check the accessories.
3
Obtain additional equipment.
4
Protect the library against ESD.
For rack-mount models, obtain a fork lift or at least
5
four people. For standalone models, remove the side
panels to access the handles.
Make sure your host bus adapter card or cards and
6
application software are compatible with the library
and the tape drives.
1
Advertisement
Table of Contents
