All manuals and user guides at all-guides.com
Chapter 5: Gateway Configuration
The information in this chapter covers the configuration options for the OD200's
Internet gateway functions.
The OD200 provides comprehensive firewall features and NAT isolation for Internet
traffic passing from the WiMAX service provider to the local network connected to
the LAN ports. The DHCP server feature can assign IP addresses for up to 32 local
network PCs and wireless clients.
The Advanced Setup menu includes the following items for Internet gateway
configuration.
Menu
WAN
WAN Settings
DNS
LAN
LAN Settings
DHCP Client List
NAT
Virtual Server
Port Mapping
DMZ
Firewall
Firewall Setting
Firewall Options
Client Filtering
MAC Control
Route
Routing Table List
UPnP
Settings
Table 5-1 Gateway Configuration
Description
Sets the connection method of your Internet service provider
Specifies DNS servers that you want to access
Sets the unit's IP address and configures the DHCP server
for the local network
Displays connected DHCP clients that have been assigned
IP addresses by the DHCP server
Allows the unit to be configured as a virtual server
Enables IP port mapping for special applications
Allows clients to connect to the unit directly bypassing the
firewall
Controls access to and from the local network
Blocks scans of the network services from an outside hacker
Blocks Internet access based on IP addresses
Blocks internet access based on MAC addresses
Displays the routing table
Provides support for Universal Plug and Play devices
Page
5-2
5-2
5-6
5-7
5-7
5-8
5-8
5-8
5-10
5-11
5-11
5-11
5-11
5-13
5-14
5-15
5-15
5-16
5-16
5-1
Need help?
Do you have a question about the OD200 and is the answer not in the manual?