Authentication; Figure 6-2 Wimax Profile Authentication - Eap-Ttls; Figure 6-3 Wimax Profile Authentication - Eap-Tls - Edge-Core OD200 User Manual

6
All manuals and user guides at all-guides.com
WiMAX Settings
Operator Restriction – When enabled, the user can only connect to the service
provider specified in the profile. The user cannot roam to other networks. When
disabled, the operator specified in the profile will be used when base stations are
detected, otherwise the user can roam to other networks. (Default: Disabled)
Scan Frequency – Specifies a center frequency to scan. (Range: 2000-4000 MHz)
Scan Bandwidth – Specifies the bandwidth of the scan channel. (Options: 3.50,
5.00, 7.00, 8.75, 10.00 MHz)
Add/Remove – Use the Add button to add a new center frequency and channel
bandwidth to scan. Use the Remove button to delete a frequency from the scan list.

Authentication

Set user authentication for the WiMAX connection profile, as specified by the service
provider. Selecting EAP-TTLS or EAP-TLS displays the parameters that are
required for configuring the authentication method.

Figure 6-2 WiMAX Profile Authentication - EAP-TTLS

Figure 6-3 WiMAX Profile Authentication - EAP-TLS

Enable Authentication – Enables user authentication for connection to the
network. (Default: Disabled)
6-2