Using The Setup Wizard; Figure 3-3 Host Settings - Edge-Core OD200 User Manual

All manuals and user guides at all-guides.com

Using the Setup Wizard

The Setup Wizard takes you through the basic configuration steps for the current
operating mode.
Launching the Setup Wizard – To perform basic configuration, click Setup Wizard
on the home page.
When configuring the unit through the Setup Wizard you will need to proceed
through the following steps:
1. Host Settings – The Host Settings page defines a name that identifies your
unit and the domain name used by the local network.
Host Name – The name that uniquely identifies the unit.
Domain Name – The name that uniquely identifies the domain to which the unit
belongs.

Figure 3-3 Host Settings

Using the Setup Wizard
3-3
3