Figure 8-1. Wireless Settings - Edge-Core OD200 User Manual

8
Wi-Fi Settings
Interface Status – Enables the Wi-Fi radio.
Network Name (SSID) – The Service Set ID (SSID) that identifies the Wi-Fi
network. The SSID is case sensitive and can consist of up to 32 alphanumeric
characters. (Default: default)
Radio Channel – The radio channel used by the unit and its clients to communicate
with each other. This channel must be the same on the unit and all of its wireless
clients. The available channel settings are limited by local regulations. (Default: 1;
Range: 1-11)
Note: If you experience poor performance, you may be encountering interference from
another wireless device. Try changing the channel, as this may eliminate
interference and increase performance. Channels 1, 6, and 11, as the three
non-overlapping channels in the 2.4 GHz band, are preferred.
Auto Channel Select – Enables the unit to automatically select an available radio
channel. (Default: Enabled)
8-2
All manuals and user guides at all-guides.com

Figure 8-1. Wireless Settings