L2Tp Settings; Figure 5-4 L2Tp Settings - Edge-Core OD200 User Manual

5
All manuals and user guides at all-guides.com
Gateway Configuration

L2TP Settings

If your service provider supports Layer 2 Tunneling Protocol (L2TP) for your Internet
connection, configure the settings described below.

Figure 5-4 L2TP Settings

User Name – Enter your user name for connecting to the L2TP service, as supplied
by the service provider. (Range: 1-32 characters)
Password – Specify the password for your connection, as supplied by the service
provider. (Default: No password)
L2TP Network Server – The IP address of the L2TP server, as specified by the
service provider.
Keep Alive – This option enables the unit to check periodically that the L2TP
connection is still operating. If the connection is found to be lost, the unit
automatically attempts to reconnect to the service provider. (Default: Enabled)
Keep Alive Time – The time period the unit waits before checking that the L2TP
connection is still operating. This parameter only applies when Keep Alive is
enabled. (Default: 60 seconds; Range: 10-180 seconds)
5-4