Lambda Plate Compensator; Dic Prisms; Optional Accessories - Leica DM2000 Operating Manual

6. Assembly

6.8 Lambda Plate Compensator*

• Raise the condenser to it's upper stop
position.
• Remove the DLF filter magazine from the base
if present.
• Attach the lambda plate compensator to the
base.

6.9 DIC Prisms

The condenser prisms have already been
mounted at the factory.
To adjust the condenser prisms during first use
→ p. 34.
To retrofit DIC prisms, see → p. 69.
Without zoom magnification, for 1-chip cameras only:
C-mount adapter 1 x HC
C-mount adapter 0.63 x HC
C-mount adapter 0.5 x HC
C-mount adapter 0.35 x HC
With zoom magnification (vario TV adapter) for 1-3 chip cameras:
C-mount, 0.32-1.6 x HC
B-mount (ENG), 0.5-2.4 x HC (1/2-inch)
+)
from zoom factor 0.42 x only!
Without zoom magnification, for 1-3 chip cameras:
C-mount adapter 1 x
B-mount adapter 1 x
B-mount adapter 1.25 x
F-mount adapter 1 x
F-mount adapter 1.25 x
Plus (Essential Requirement): TV optics 0.5 x HC
28

6.10 Optional Accessories

Camera
A camera can be connected via an adapter.
• Attach the adapter to the top port of the tube
and fasten it tightly with the side clamping
screw.
• Screw on the camera.
Note:
The size of the camera chip and the mounting
system (B-mount, C-mount, etc.) must be
considered when choosing an adapter.
See table.
Recorded picture diagonal in mm for
1 inch 2/3 inch
camera camera
16 11
- 17.5
- -
- -
- -
- -
- -
- -
- 17.5
- -
- 17.5
1/2 inch 1/3 inch
camera camera
8 6
12.7 9.5
16 12
- 17.1
19 +) -5 18-3.8
16-3.3 -
16 12
16 12
- -
16 12
- -