Condenser - Leica DM2000 Operating Manual

6.2 Condenser

• If present, screw the condenser head into the
condenser.
• Using the condenser height adjuster (10.3),
turn the condenser holder (fig. 9) completely
downward.
• Unscrew the clamping screw for the con-
denser (10.2) far enough so that the
condenser can be inserted from the front.
• From the front, insert the condenser into the
condenser holder as far as it will go. On the
underside of the condenser, there is an orien-
tation pin (8.1), which must be located in the
guiding notch (9.1).
• Pull the condenser's clamping screw (910.2)
so that the condenser is locked in place.
Fig. 8 Underside of condenser(example CL/PH)
1 Orientation pin
2 Auxiliary condenser lens LS (for Leica DM2000)
1
2
The condenser must be centered before using
the microscope.
→ Köhler illumination p. 31.
Fig. 9
1 Guiding notch
Fig. 10
1 Condenser centering
2 Clamping screw for condenser
3 Condenser height adjuster
1
3
1
Note:
Condenser holder
1
Condenser holder
6. Assembly
3
2
1
19