GRAUPNER S1024 Reference Manual page 6

Graupner mz-32 / mz-16 Help Reference Manual
If the image does not meet above set requirements it will not be loaded and replaced by a
default image.
How to assign an image to a model:
Load the model you would like to associate with a
widget and have an image place holder available of 2
x 2 blocks. Tap on the upper left corner to add a new
widget.
Scroll down to the Model Link widget and tap on it.
Look for your model on the model list and tap on your
model name. It should already be selected and
highlighted.
Page 6 of 51 Help-Ref-EN-V2.7