Base Menu; Model List - GRAUPNER S1024 Reference Manual

The image needs to be copied into the Image folder on your radio using the Mass Storage
mode (System/USB Menu).
If the image does not meet above set requirements it will not be loaded and replaced by a
default model type image.
W01S1

BASE Menu

tap on the model type icon in the upper center of the screen to activate the desired filter.
You can sort the model list by name, creation date or bind group by tapping on the table
header.
B01S1
Graupner mz-32 / mz-16 Help Reference Manual
The image type is Windows BMP and must have the
following format:
480 x 272 pixels, 24bit at 72dpi.
To associate an image with your model the image must
have the same name as your model with the "S_"
prefix.
For example:
Model name: Ab5HottRigger.mdl
Image Name: S_HottRigger.bmp

MODEL LIST

In the Model List menu, you can create a new model or
select and load an existing one.
To create a new model, tap on the number next to the
model name. A selection toolbar will show with the
available options.
Tap the + icon to create a new model.
Tap on the copy icon to copy an existing model.
After tapping the + icon, a keypad will show where you
can enter your model name. Tapping the return key
brings you to the New Model selection menu.
To change the view selection of available model types,
Page 8 of 51 Help-Ref-EN-V2.7