Changing The Oil In The Exciter Housing - Fayat Group DYNAPAC DRP25D Original Operating Instructions

Maintenance – Annually

8.9.2 Changing the oil in the exciter housing

1
2
Fig. 80
Fig. 81
84
NOTICE!
Components may get damaged!
–
Protective equipment:
1. Drive the machine onto horizontal, level, firm ground.
2. Park the machine safely
in secured condition' on page 59.
3. Clean the area around the bleeding screw (1) and filling/drain
plug (2).
4. Tilt the machine slightly towards the oil drain side and secure
it properly.
5. Unscrew the bleeding screw.
6. Unscrew the filling/drain plug and collect any oil running out.
B-695-0157
7. Tilt the machine to the opposite side and secure it properly.
NOTICE!
Components may get damaged!
Do not use low-ash engine oils for the exciter shaft
housing.
Observe filling quantity
and lubricants' on page 73.
8. Fill in new oil.
B-695-0159
DRP25D
Use only oil of the permitted specification
Ä Chapter 8.4 'List of fuels and lubricants'
on page 73.
n Working clothes
n Safety shoes
n Protective gloves
Ä Chapter 6.4 'Parking the machine
Ä Chapter 8.4 'List of fuels