Table of Contents
Advertisement
Maintenance – Annually
Fig. 99
Fig. 100
Fig. 101
Fig. 102
92
4.
Pull the starter rope with the starter handle (1) out com-
pletely.
5.
Secure the coil (2) against winding up.
6.
Loosen the knot (3) in the starter rope and remove the old
starter rope.
7.
Carefully turn the coil back, until the recoil spring is relieved.
8.
Thread in the new starter rope and fix it with knots on both
ends .
A = 15 mm (0.6 in)
9.
Pre-tension the coil by approx. 4 rotations in direction of
arrow.
Thereby place the starter rope into the recess in the coil .
10.
CAUTION!
Danger of injury caused by the starter
handle hitting against your body!
–
Do not let the starter handle hit back.
Slowly guide the starter handle back to initial position .
11.
Pull the starter handle to check the function and light move-
ment of the recoil starter.
DRP25D
Advertisement
Table of Contents
