Table of Contents
Advertisement
Fig. 65
Fig. 66
7.
Blow the air filter out with dry compressed air (max. 5 bar
(73 psi)) from inside to outside by moving the gun up and
B-GEN-0042
down inside the element, until it is free of dust.
8.
Examine the air filter with a torch for cracks and holes.
9.
Replace the air filter if it is damaged.
10.
Insert the air filter (1) carefully into the filter housing and
1
fasten it with the knurled nut (2).
2
11.
3
Close the cap (3).
B-HAT-0006
CAUTION!
Danger of eye injuries caused by particles
flying around!
–
Wear your personal protective equipment
(safety gloves, protective working
clothes, goggles).
NOTICE!
Danger of engine damage!
–
Ensure correct fit of air filter cover and
seal.
DRP25D
Maintenance – Weekly
77
Advertisement
Table of Contents
