Table of Contents
Advertisement
Maintenance – Running-in instructions
8.5 Running-in instructions
8.5.1 General
8.5.2 After 25 operating hours
74
The following maintenance work must be performed when running
in new machines or overhauled engines.
1.
Change the engine oil
oil and cleaning the oil filter' on page 81.
2.
Check the valve clearance, adjust if necessary
8.9.6 'Checking, adjusting the valve clearance' on page 89.
3.
Check engine and machine for leaks.
4.
Retighten the fastening screws on air filter, exhaust and other
attachment parts.
5.
Retighten the bolted connections on the machine.
6.
Check the V-belt
on page 101.
7.
Check the oil level in the exciter shaft housing
8.11.4 'Checking the oil level in the exciter housing'
on page 102.
DRP25D
Ä Chapter 8.9.1 'Changing the engine
Ä Chapter 8.11.3 'Servicing the V-belt'
Ä Chapter
Ä Chapter
Advertisement
Table of Contents
