Fayat Group DYNAPAC DRP25D Original Operating Instructions page 98

Maintenance – Every 2 years/every 500 operating hours
Fig. 116
Fig. 117
Fig. 118
Fig. 119
98
5. Unscrew the bleeding screw and collect any oil running out.
6. Screw in the bleeding screw.
B-695-0165
7. Clean the area around the oil level inspection plug and
unscrew the plug.
B-695-0013
8. Place a cloth underneath the filler bore to collect leaking oil.
NOTICE!
Components may get damaged!
–
9. Fill with oil through the filler bore until it starts to run out
through the level inspection bore.
B-695-0017
10. Slacken the bleeding screw.
11. Wait until all air has escaped and then tighten the bleeding
screw.
B-695-0164
DRP25D
Use only oil of the permitted specification
Ä Chapter 8.3.4 'Hydraulic oil' on page 71.