Table of Contents
Advertisement
Troubleshooting – Starting the engine with the recoil starter
Fig. 129
Fig. 130
Fig. 131
108
3.
Set the handle to position "0".
B-695-0004
4.
Pull the rope by the starter handle, until resistance can be
felt.
5.
Guide the starter handle back to initial position.
B-GEN-0083
6.
B-GEN-0084
Pull the starter handle quickly and with power.
7.
Manually guide the starter handle back to initial position.
8.
If the engine does not start during the first attempt, repeat the
starting process.
9.
Run the engine warm for approx. 1 to 2 minutes in idle
speed.
DRP25D
CAUTION!
Danger of injury caused by uncontrolled
machine movement!
–
Always hold on to a running machine.
–
Always keep an eye on a running
machine.
NOTICE!
The starter rope may tear off!
–
Do not pull the starter rope all the way
against the end stop.
NOTICE!
Danger of engine damage!
–
Warm up engine for a short while before
starting work. Do not operate the engine
immediately under full load.
Advertisement
Table of Contents
