Table of Contents
Advertisement
Loading / transporting the machine – Loading the machine
7.1 Loading the machine
Fig. 52
Fig. 53
62
Loads may only be attached and hoisted by an expert/qualified
person.
Do not use lashing points that are damaged or impaired in any
way.
Only use lifting and lashing tackle with sufficient load bearing
capacity for the weight to be loaded. Minimum load bearing
capacity of lifting tackle: see operating weight
nical data' on page 11.
Always use appropriate lashing tackle at the lashing points.
Use lashing tackle only in the specified loading direction.
Lashing tackle must not be damaged by machine parts.
When lifting the machine, make sure the load does not move in an
uncontrolled way. If necessary, hold the load steady with guide
ropes.
Protective equipment:
1.
Park the machine safely
in secured condition' on page 59.
2.
Allow the engine to cool down.
3.
If necessary, remove the transport wheels from the base
plate.
4.
Move the steering rod to an upright position and engage the
locking pawl lever securely.
B-695-0129
5.
Attach the lifting tackle to the dedicated lifting eye.
6.
Lift the machine carefully and set down again at the intended
B-695-0025
location.
DRP25D
n
Working clothes
n
Safety shoes
n
Protective gloves
Ä Chapter 6.4 'Parking the machine
DANGER!
Danger to life caused by suspended
loads!
–
Do not step or stand under suspended
loads.
Ä Chapter 2 'Tech-
Advertisement
Table of Contents
