Cut-Sheet / Paper Feed Control; Condensed Print Reset; Define A Download Character; Delete Character - Printronix SL5000 Series Programmer's Reference Manual

Condensed Print Reset

ASCII Code DC2
Hex Code 12
Dec Code 18
Purpose Cancels the condensed print mode set by SI, ESC SI, or the
operator panel.
Comment This returns the printer to the font that was active before
condensed print occurred. Other print attributes are not affected.
Example See the Condensed Print control code (page 168) for an
example of Condensed Print Reset.

Cut-Sheet / Paper Feed Control

ASCII Code ESC EM n
Hex Code 1B 19 n
Dec Code 27 25 n
Purpose This code controls the paper feed mechanism on Epson printers.
†Comment The printer ignores this command.

Define a Download Character

ASCII Code ESC &
Hex Code 1B 26
Dec Code 27 38
Purpose Defines a download character.
†Comment The printer ignores this command and removes all downloaded
font data from the data stream.

Delete Character

ASCII Code DEL
Hex Code 7F
Dec Code 127
Purpose Deletes the previous character on a line.
Comment This command is ignored if it occurs immediately after a CR or a
paper motion command. Characters truncated due to line length
restrictions are not affected by this code.
Condensed Print Reset
169