Serial Number Commands; Part Number Commands - SMART Board SBID-6265S-C Installation And Maintenance Manual

Appendix C
Managing the display using RS-232
Get command
If multiple displays are connected
[Display],@ get fwversion
Where [Display] is the display's label (A, B, and so on).

Serial number commands

Get command
get serialnum

Part number commands

Get command
get partnum
smarttech.com/kb/171414
Response
@,[Display] fwverversion=[Value]
Where
[Display] is the display's label (A, B, and so on).
l
[Value] is the firmware version.
l
Response
serialnum=[Value]
Where [Value] is the serial number.
NOTE
If multiple displays are connected, the response includes the
serial numbers for all displays separated by commas.
Response
partnum=[Value]
Where [Value] is the part number, including the revision.
NOTE
If multiple displays are connected, the response includes the
part numbers for all displays separated by commas.
77