Using Recommended Cables - SMART Board SBID-6265S-C Installation And Maintenance Manual

Chapter 3
Connecting computers and other devices
Input source
HDMI 3
VGA
USB Type-C
If possible, set connected computers to these resolutions and refresh rates. See the computers' operating
system documentation for instructions.

Using recommended cables

SMART recommends the following varieties of cable:
Cable type Maximum length
HDMI 23' (7 m)
VGA 23' (7 m)
Stereo 3.5 mm 20' (6 m)
USB 2.0 16' (5 m)
USB 3.0 9' (3 m)
1
The performance of cables longer than 23' (7 m) is highly dependent on the cable's quality.
smarttech.com/kb/171414
Resolution
3840 × 2160
1920 × 1080
3840 × 2160
Recommendation
1
Use only certified premium high-speed HDMI cables that
have been tested to support the performance standard
you require.
Use VGA cables with all pins in their connectors fully
populated and wired.
[N/A]
Use a USB extender if the distance between the
computer and the display is greater than 16' (5 m). For
more information, see USB extenders on page 17.
USB 2.0 cables support Hi-Speed (480 Mbps), whether
connected to a USB 2.0 or USB 3.0 receptacle. For
SuperSpeed (5 Gbps), connect a USB 3.0 cable to a USB
3.0 receptacle.
SMART supports only installations that use directly
connected video and USB cables, AC-powered
extenders, or USB extenders purchased from SMART.
You might be able to use higher-grade cables that are
longer than specified. If you have problems with such a
cable or an extender of any type, test the connection with
a shorter cable before contacting SMART Support.
Refresh rate
60 Hz
60 Hz
60 Hz
33