Appendix C Managing SMART Board MX (V3, V2, and V2-C) series displays using RS-232
Model number commands
Get command
get modelnum
Serial number commands
Get command
get serialnum
Part number commands
Get command
get partnum
Asynchronous messages
The display sends an asynchronous message when the front control panel, Settings app, or remote
control are used to change a display's setting that can be controlled by RS-232. The display will also send
an asynchronous message if the display's power state changes. Asynchronous messages are identified
by a pound sign (#) before the message and aren't followed by a command prompt (>).
smarttech.com/kb/171555
Response
modelnum=[Value]
Where [Value] is one of the following:
sbid-mx055-v2
l
sbid-mx065-v2
l
sbid-mx075-v2
l
sbid-mx086-v2
l
Response
serialnum=[Value]
Where [Value] is the serial number.
Response
partnum=[Value]
Where [Value] is the part number, including the revision.
107