Remote Control And Ir Sensor; Temperature And Humidity Sensors; Mounting Hardware; Accessory Mounting Points - SMART Board SBID-6265S-C Installation And Maintenance Manual

Chapter 1
Welcome

Remote control and IR sensor

You can use the remote control to turn the display on and off, adjust display settings,
and so on.
The display's IR sensor is located in the top-left corner of the display's frame.

Temperature and humidity sensors

The display features integrated temperature and humidity sensors that enable real-time
measurement and recording of the environmental conditions surrounding the display.
This data is easily accessible using the temperature and humidity app in the display's App
library.
NOTE
Temperature and humidity sensors are available only when iQ is enabled.

Mounting hardware

The display comes with a WM-SBID-200 wall mount, which you can use to mount the display on a wall (see
Installing the display on a wall on page 20).
You can also mount the display on a wall or mobile stand (see Accessories on the next page).

Accessory mounting points

The display features M4 mounting points located at the top, bottom, left, and right for SMART approved
accessories.
smarttech.com/kb/171414 14