Room Computers And Guest Laptops; Accessory Slot - SMART Board SBID-6265S-C Installation And Maintenance Manual

Chapter 1
Welcome
You can connect to a network using Wi-Fi or an Ethernet cable:
The Wi-Fi module supports both 2.4 and 5 GHz bands.
l
The two RJ45 jacks allow you to connect the display and an external device, such as a computer, to a
l
Gigabit Ethernet network.
For more information, see Connecting to a network on page 26.

Room computers and guest laptops

You can connect room computers and guest laptops to the display and view and interact with their inputs.
The display comes with SMART software that you can install on connected computers to take full advantage
of the display's features while using the connected computers.
For more information, see Connecting room computers and guest laptops on page 31.

Accessory slot

You can install an OPS-compatible device, such as a SMART OPS PC module, in the accessory slot.
SMART OPS PC modules provide a complete Windows® 10 Pro installation.
For more information on SMART OPS PC modules, see SMART OPS PC module on page 16.
CAUTION.
The accessory slot's maximum available power is 60 W. The slot is not a limited power source. To
l
reduce the risk of fire, make sure that accessories connecting to the slot satisfy the fire enclosure
requirements of IEC 60950-1 and/or IEC 62368-1.
Do not install or remove the OPS PC or other devices from the accessory slot while the display is
l
turned on. Ensure the power switch on the back of the display beside the AC power inlet is in the OFF
(O) position.
NOTE
Unlike with previous SMART Board interactive displays, the SMART Board 6000S and 6000S Pro
interactive displays don't require an AM30, AM40, or AM50 appliance in the accessory slot. The iQ
experience is embedded on these interactive displays (see iQ experience on page 10). For this reason,
SMART doesn't recommend installing AM30, AM40, or AM50 appliances in these displays' accessory
slots.
smarttech.com/kb/171414 12