Firmware Version Commands; Serial Number Commands; Part Number Commands - SMART Board 7000 series Installation And Maintenance Manual

APPENDIX B
REMOTELY MANAGING THE DISPLAY

Firmware version commands

Get command
If one display is connected
get fwversion
If multiple displays are connected
[Display],@ get fwversion
Where [Display] is the display's label (A, B, and so on).

Serial number commands

Get command
get serialnum

Part number commands

Get command
get partnum
63 smarttech.com/kb/171164
Response
fwversion=[Value]
Where [Value] is the firmware version.
@,[Display] fwverversion=[Value]
Where
[Display] is the display's label (A, B, and so on).
l
[Value] is the firmware version.
l
Response
serialnum=[Value]
Where [Value] is the serial number.
NOTE
If multiple display are connected, the response includes
the serial numbers for all displays separated by commas.
Response
partnum=[Value]
Where [Value] is the part number, including the revision.
NOTE
If multiple display are connected, the response includes
the part numbers for all displays separated by commas.