Cleaning And Maintaining Hardware; Checking The Display Installation - SMART Board SBID-6265S-C Installation And Maintenance Manual

Chapter 4
Maintaining the display
In some situations, such as when you transport the display or clean its screen, you need to turn the display
off. You can turn it back on after.
You can also reset the display.
To turn the display off
1. Press the Power button
A slider appears on the screen.
2. Move the slider to the right.
3. Flick the switch beside the AC power inlet to the OFF (O) position.
NOTE
Wait at least 30 seconds before turning the display back on.
To turn the display back on
1. Flick the switch beside the AC power inlet to the ON (I) position.
2. Press the Power button
To reset the display
Press and hold the Power button
The display resets.

Cleaning and maintaining hardware

Checking the display installation

Inspect the display installation frequently to ensure that the display remains securely installed.
Check the mounting location for signs of damage or weakness that can occur over time.
l
Check for loose screws, gaps, distortions, or other issues that could occur with the mounting hardware.
l
If you find an issue, contact a trained installer.
smarttech.com/kb/171414
on the convenience panel or the remote control for five seconds.
on the convenience panel or the remote control.
on the convenience panel or the remote control for 10 seconds.
41