Connecting Usb Drives, Peripherals, And Other Devices; Connecting An External Display - SMART Board SBID-6265S-C Installation And Maintenance Manual

Chapter 3
Connecting computers and other devices
External audio systems
l
Room control systems
l

Connecting USB drives, peripherals, and other devices

Depending on the model, the display includes either one USB Type-C receptacle and one USB 3.0 Type-A
receptacle on the convenience panel, or two USB 3.0 Type-A plugs on the convenience panel (see images
below). The display also includes one USB 3.0 Type-A receptacle on the connector panel. You can connect
USB drives, peripherals (such as keyboards), and other devices to these connectors and use the devices
with the iQ experience, connected computers, and devices installed in the accessory slot (such as the
SMART OPS PC).
SBID-6000S-C/SBID-6200S-C
SBID-6000S-CPW/SBID-6200S-CPW

Connecting an external display

You can connect an external display using the HDMI 2.0 out connector on the
connector panel (pictured). The external display will show the same image. This
is useful when you're using the display in an auditorium or other large space
where it would be beneficial to have a second display.
smarttech.com/kb/171414
All other models
35