Conference Information - Polycom ReadiVoice Operator's Manual

Proprietary & Confidential
The Conference Details view contains four areas, described in the sections
that follow:

Conference Information

Participant List
Conference Controls
Operator Notes
Conference Information
The heading shows the server name, conference ID, and bridge ID. Below that,
you see the following information about the conference:
• Status — The conference run state and lock state. Run states are:
— Normal — Any participant can speak to the conference.
— Muted — All ordinary participants (but not the subscriber) are muted.
They can hear the conference, but can't speak. Muted participants can
unmute themselves.
— Listen Only — All ordinary participants (but not the subscriber) are in
listen-only mode. They can hear the conference, but can't speak.
Listen-only participants can't unmute themselves.
Lock states are:
— Unlocked — Authorized callers (those who enter the correct code or
codes) may join the conference, up to the maximum capacity for this
subscriber.
— Locked — No one may join the conference. All callers are turned away.
— Locked w/ WR — Authorized callers are put on hold (in the Waiting
Room), and the subscriber is notified. The subscriber can speak with,
admit, or disconnect waiting callers.
• Subscriber — The name of the subscriber for this conference.
• Group Name — The subscriber group name.
Windows Operator Interface
29