Figure 2-1 Bridge List; Your Operator Voice Path - Polycom ReadiVoice Operator's Manual

ReadiVoice Windows Operator Guide

Your Operator Voice Path

8
Figure 2-1 Bridge list
To speak with a caller or conference, you need a voice path to the correct
bridge. Unless you have a multi-line phone for operator connections, you can
have only one operator voice path at a time.
Usually, there's no need to explicitly establish a voice path to a bridge. The
voice path is established when you answer a request or connect to a
conference. But, you can establish a voice path manually and you can elect to
always use the same phone number for voice paths to a server's bridges, so
that the system dials you in the future without prompting for a phone number.
To establish a voice path to a bridge manually:
1
In the navigation tree, select the server to which the bridge is connected.
2
The server's bridges appear in the pane on the right.
3
Click the gray box at the left of the bridge to select it.
The bridge row becomes highlighted.
4
On the toolbar, click the Connect Voice Path to Bridge button.
The Create Voice Path dialog box appears
Phone Number box contains the default number specified for the server
or group, and it's highlighted.
(Figure 2-2 on page 13). The
Proprietary & Confidential