Figure 2-2 Establishing An Operator Voice Path To A Bridge - Polycom ReadiVoice Operator's Manual

Proprietary & Confidential
Figure 2-2 Establishing an operator voice path to a bridge
5
To change your number, enter the new one. To always use this number
when connecting to a bridge on this server, click the check box.
If you mark the check box, the Windows Operator won't display the
Create Voice Path dialog box for this server in the future, it will simply call
you at the number you specified. Be sure the number is correct!
6
Make sure your phone is on hook and the phone number entered is
correct, and then click OK.
The bridge dials the number, and your phone rings.
7
Answer the phone.
Your line is connected to a port on the bridge. In the bridge list, the voice
path icon for the bridge becomes dark.
8
To disconnect your voice path, simply hang up your phone. Or, if you
want to hear a message telling you that you've been disconnected by the
operator, click the Disconnect Voice Path from Bridge button on the
toolbar.
Operator Tasks
9