Polycom ReadiVoice Operator's Manual page 26

ReadiVoice Windows Operator Guide
12
6
Answer the phone.
Your line is connected to a port on the bridge. The Conference Details
view of the conference appears
If this is a private request, the ReadiVoice system connects your voice path
directly to the participant making the request. The participant's status
changes to Op. In the request alert box, Reconnect and Hold buttons
replace the Answer Request button.
If this is a conference request, the ReadiVoice system enables the Join
button.
7
For a private request, speak with the participant. You may need to
perform other operator tasks described in this chapter.
8
When you finish with the participant, click the Reconnect button to
return the participant to the conference.
9
For a conference request, click the Join Conference button to the right of
the Conference Details view to join the conference and speak with all the
participants.
If the conference is locked, you see the Ring button instead. Click it to
notify the conference that an operator wants to join. When the subscriber
unlocks the conference, the button changes back to Join, and you can enter
the conference.
Your voice path line appears in the Conference Participants list (named
Operator) and, depending on how Roll Call is configured, the ReadiVoice
system plays either a tone, a message, or nothing to the conference.
10 When you're finished, click Leave Conference to exit from the
conference.
(Figure 2-4 on page 17).
Proprietary & Confidential