Design and function
Transport and installation
5.1.5
Intermediate hose package connection
Some wire electrodes (e.g. self-shielding cored wire) are welded using negative polarity. In this
case, the welding current lead should be connected to the "-" welding current socket, and the
workpiece lead should be connected to the "+" welding current socket. Observe the information
from the electrode manufacturer!
Item Symbol
1
2
3
4
5
6
7
8
22
Description
0
Wire feed unit
Intermediate hose package
Intermediate hose package strain relief
19-pole connection socket (analogue)
Wire feed unit control lead connection
Connector plug, welding current "+"
Welding current connection on wire feed unit
Connection socket, "-" welding current
•
MIG/MAG cored wire welding:
Quick connect coupling (red)
coolant return
Quick connect coupling (blue)
coolant supply
Figure 5-1
Welding current to wire feed/torch
099-005149-EW501
11.08.2016