Intended Use; Applications; Use And Operation Solely With The Following Machines - EWM Taurus 551 Basic FDG Operating Instructions Manual

Intended use

Applications

Intended use
3
Hazards due to improper usage!
The machine has been constructed to the state of the art and any regulations and
standards applicable for use in industry and trade. It may only be used for the welding
procedures indicated at the rating plate. Hazards may arise for persons, animals and
material objects if the equipment is not used correctly. No liability is accepted for any
damages arising from improper usage!
•
The equipment must only be used in line with its designated purpose and by trained or
expert personnel!
•
Do not improperly modify or convert the equipment!
3.1 Applications
Arc welding machine for gas-shielded metal-arc welding and MMA welding as secondary process. It may
be possible to expand the range of functions by using accessories (see the documentation in the relevant
chapter).
3.1.1

Use and operation solely with the following machines

A suitable wire feed unit (system component) is required in order to operate the welding
machine!
Taurus
Basic drive 200C
Basic drive 300C
Basic drive 4L
Basic drive 4
drive 4 Basic
drive 4 IC Basic
drive 4 Basic MMA
drive 4 IC Basic D200
12
355, 405, 505 Basic
351, 401, 451, 551 Basic








WARNING
099-005149-EW501
11.08.2016