Rackmount Modules (Optional); Mount The St-C6Rck-24 Rackmount Extender Module Tray; Figure 7- Mount St-C6Rck-24 Extender Module Tray In A Rack; Figure 8- Secure Each Module To The Tray - NTI ST-C6HD-LA-L-300M Installation And Operation Manual

NTI XTENDEX 300 Foot HDMI and IR Extender

Rackmount Modules (optional)

If ST-C6-300M Series XTENDEX rackmount Local Unit modules are being installed, then an ST-C6RCK-24 Rackmount Extender
Module Tray must be used (sold separately) to mount the modules to a RACK.
mounting method for up to 12 Local XTENDEX modules.

Mount the ST-C6RCK-24 Rackmount Extender Module Tray

1. The ST-C6RCK-24 Rackmount Extender Module Tray was designed to be directly mounted in a rack. It includes a mounting
flange to make attachment easy.
2. Install 4 cage nuts (supplied) to the rack in locations that line up with the holes in the mounting flange on the tray.
Then secure the tray to the rack using four #10-32 x 3/4" screws (supplied). Be sure to tighten all mounting screws securely.

Figure 7- Mount ST-C6RCK-24 Extender Module Tray in a rack

3. Slide each module into the tray and line up the holes in the mounting plate on the module with corresponding holes in the tray.
Secure the module(s) using the two screws provided. Blank plates and screws are provided to cover empty module spaces.
4. Secure the power supply for each module to the power supply/cable management shelf at the rear of the tray using the bracket
and screw supplied.
#10-32 x 3/4"
Rack Screws
(supplied)

Figure 8- Secure each module to the tray

8
The ST-C6RCK-24 provides a convenient
Rack
Cage Nuts
(supplied)