Buzzer; Push Message; Manual Alarm; View Alarm Status - Speco NRL User Manual

Alarm Management
and the pop-up message box. Click "Apply" to save the settings.

9.5.4 Buzzer

Click StartSettingsAlarmEvent NotificationBuzzer to go to the buzzer configuration interface. Set the delay time of the buzzer and then click
"Apply" to save the setting. You can click "Test" to test the buzzer.

9.5.5 Push Message

Click StartSettingsAlarmEvent NotificationPush Message to go to the interface as shown below. Check "Enable" and then click "Apply"
button to save the settings. If Push Server is online, it will push messages to the mobile clients.

9.6 Manual Alarm

Click on the tool bar at the bottom of the live view interface to pop up a window. Click "Trigger" to start alarm. Click "Clear" to stop alarm.

9.7 View Alarm Status

Click StartSettingsAlarmAlarm Status or click on the tool bar at the bottom of the live view interface to view the alarm status.
49
NVR User Manual