Event Setup; Internal Buzzer; Event Icon - Speco DVR-4TN User Manual

User's Manual
A sequence can have up to 16 entries. The user can select fewer than 16
entries for a camera sequence and leave the remaining entries blank. The
sequence can include a specific camera or cameras multiple times.
5.6

Event Setup

This menu allows the user to determine DVR-4TN/ 8TN/ 16TN/ 16TS/ 16TT
series behavior in response to an alarm event. In the Main menu, move the
cursor to <Event Setup> and press ENTER. The following menu is displayed.

1. Internal Buzzer

2. Event Icon

3. Email Notice
4. Email Attachment
5. Event Full Screen
6. Event Duration
7. Per Channel Config
Items in the Event Setup menu are described in the following subsections.
5.6.1 Internal Buzzer
This item allows user to enable / disable the DVR-4TN/ 8TN/ 16TN/ 16TS/
16TT series internal buzzer. If set to <ON>, the buzzer is activated in
response to an alarm. If set to <OFF>, the buzzer is not activated. The default
setting is <ON>.
5.6.2 Event Icon
This item enables (ON) / disables (OFF) the display of an Event Icon on the
main monitor when an alarm event occurs. The default setting is <ON>
(enable).
The event types are represented by a character respectively; the descriptions
are listed in the table below.
94
Event Setup
Event type Description
Alarm in event
A
Motion detection event
M
Video loss event
L
ON
ON
OFF
OFF
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08