Section 2: To The Operator - Taylor 811 Series Operator's Manual

Section 2
The Taylor grills included in this manual consist of the
base model numbers 811, 813, 819, and 821.
Prefix letters were added to the base model numbers to
denote minor design differences:
L = Platen Length 21 in. (533 mm)
G = Grooved Option
The model 811 and 813 have three 12 in. (305 mm) lower
cook zones. The 811 has three upper platens, and the
813 has two upper platens.
The model 819 and 821 have two 12 in. (305 mm) lower
cook zones. The 819 has two upper platens, and the
model 821 has one upper platen.
These grills are capable of cooking a variety of products
and feature two cooking options. They provide all the
features of a flat grill as well as the advantages of 
two-sided cooking.
The grill you have purchased has been carefully
engineered and manufactured to provide dependable
operation. When properly operated and maintained, it will
produce a consistent quality product. Like all mechanical
products, it will require cleaning and maintenance. A
minimum amount of care and attention is necessary if the
operating procedures in this manual are followed closely.
IMPORTANT! This Operator's Manual should
be read before operating or performing any maintenance
on your machine.
It is strongly recommended that all personnel responsible
for the machine's operation and cleaning review these
procedures for proper training and ensure no
misunderstandings exist.
In the event you should require technical assistance,
please contact your local authorized Taylor distributor.
To the Operator
Note: Your Taylor warranty is valid only if the parts are
authorized Taylor parts, purchased from the local
authorized Taylor distributor, and only if all required
service work is provided by a Taylor service technician.
Taylor reserves the right to deny warranty claims on units
or parts if unapproved parts or incorrect refrigerant were
installed in the machine, system modifications were
performed beyond factory recommendations, or it is
determined that the failure was caused by abuse,
misuse, neglect, or failure to follow all operating
instructions. For full details of your Taylor warranty,
please see the Limited Warranty section in this manual.
Note: Constant research results in steady
improvements. Therefore, information in this manual is
subject to change without notice.
IMPORTANT! If the crossed-out waste
container symbol is affixed to this product, it signifies that
this product is compliant with the EU Directive as well as
other similar legislation in effect after August 13, 2005.
Therefore, it must be collected separately after its use is
completed and cannot be disposed as unsorted
municipal waste. The user is responsible for returning the
product to the appropriate collection facility, as specified
by your local code.
For additional information regarding applicable local
laws, please contact the municipal facility and/or local
distributor.
Model 811, 813, 819, 821 Series
To the Operator
2
2-1