Taylor 811 Series Operator's Manual page 42

OPERATING PROCEDURES
IMPORTANT! DO NOT use a jet of water to
clean or rinse the grill.
WARNING! DO NOT use cold water or ice to
cool the upper platen or the lower cook surface. Failure
to follow these instructions may result in:
• Serious electrical shock
• Burns from hot steam
• Liquid collecting inside the grill and
destroying electrical components
• Damaged cook surfaces
6
42. Use the squeegee to remove the cleaner from the
grill surface.
IMPORTANT! Step 42 must be performed
using the grill cleaning pad and holder identified on
page 4-6. Using any other pad and holder will damage
the release sheet.
6-20
Figure 6-65
Model 811, 813, 819, 821 Series
NOTICE! To avoid damaging the grill:
• Never use grill screens on the upper platen or
the lower grill surface.
• Never use any abrasives or cleaners other than
the approved cleaner.
• Never allow the grill scraper or the abrasive
cleaning materials to come in contact with the
release sheet.
43. Pour a small amount of lukewarm water on a clean,
sanitizer-soaked grill cloth while holding it over the
lower grill surface. Wipe the lower grill surface until
all residue is removed.
Note: Contact your local Taylor distributor to purchase
14548
the correct grill cleaning pad and holder. (See page 4-6.)
44. Place the release sheets flat on the lower grill
surface. Gently clean both sides of the sheets with an
approved high-temperature grill cleaner and the grill
cleaning pad and holder.
Figure 6-66
Figure 6-67
Operating Procedures
14549
14543