Taylor 811 Series Operator's Manual page 34

OPERATING PROCEDURES
If the box is blank (creating a new Item), type in the
desired name (up to 9 characters). A maximum of two
lines of description can be used. Press the OK key to
return to the previous screen.
Flat Menu Item Timing Function
Up to four flat menu items can be cooked in one zone at
any time. Select any flat item from the menu screen and
press the Standby button once to initiate the countdown
timer. The REMOVE IN time will display on the screen.
Select the same or another flat menu item and press the
Standby button again to initiate the second countdown
timer. The display screen will then change, showing the
6
REMOVE IN time for both of the flat menu items
selected. Follow this same procedure for up to four flat
menu items to be displayed.
6-12
Figure 6-30
Figure 6-31
Model 811, 813, 819, 821 Series
To Cancel a Flat Menu Item Timing Function
If only one flat menu item timing function is displayed,
press the Raise button. If two or more flat menu item
timing functions are displayed, press and hold your
131025
finger on the menu item to be canceled and press the
Raise button at the same time.
One-Function Cook Cycle Screen
The following is an example of a one-function cook cycle
screen. The first line function default is REMOVE IN.
Note: Sec, Alarm, and Gap must be set.
131069
Figure 6-32
Figure 6-33
Operating Procedures
131068
13987