Table of Contents
Advertisement
Section 2
The Taylor grills included in this manual consist of the
base model numbers (L850-L852-L858)
Prefix letters were added to the base model numbers to
denote minor design differences:
L = Platen Length 21 in. (533 mm)
Model L858 36 in. (914 mm) with three upper platens.
Models L852 24 in. (610 mm) with two upper platens.
Model L850 12 in. (305 mm) with one upper platen.
These grills can cook a variety of products and feature
two cooking options. They provide all the features of a
flat grill as well as the advantages of two-sided cooking.
The grill you have purchased has been carefully
engineered and manufactured to provide dependable
operation. When properly operated and maintained, it will
produce a consistent quality product. Like all mechanical
products, it will require cleaning and maintenance. A
minimum amount of care and attention is necessary if the
operating procedures in this manual are followed closely
IMPORTANT! This Operator's Manual should
be read before operating or performing any maintenance
on your equipment.
It is strongly recommended that all personnel responsible
for the machine's operation and cleaning review these
procedures for proper training and assurance that no
misunderstandings exist.
If you should technical assistance, please contact your
local authorized Taylor distributor.
Note:
Your Taylor warranty is valid only if the parts are
authorized Taylor parts, purchased from the local
authorized Taylor distributor, and only if all required
service work is provided by a Taylor service technician.
Taylor reserves the right to deny warranty claims on
machines or parts if Taylor-unapproved parts or incorrect
refrigerant were installed in the machine, system
modifications were performed beyond factory
recommendations, or it is determined that the failure was
caused by abuse, misuse, neglect, or failure to follow all
To the Operator
operating instructions. For full details of your Taylor
warranty, please see the Limited Warranty section in this
manual.
Note:
Constant research results in steady
improvements; therefore, information in this manual is
subject to change without notice.
IMPORTANT! If the crossed-out waste
container symbol is affixed to this machine, it signifies
that this machine is compliant with the EU Directive as
well as other similar legislation in effect after August 13,
2005. Therefore, it must be collected separately after its
use is completed and cannot be disposed as unsorted
municipal waste. The user is responsible for delivering
the product to the appropriate collection facility, as
specified by your local code.
For additional information regarding applicable local
laws, please contact the municipal facility and/or local
distributor.
Model L850, L852, L858 Series
To the Operator
2
2-1
Advertisement
Table of Contents
